Showing posts with label boca bearings. Show all posts
Showing posts with label boca bearings. Show all posts

Winter Reel Maintenance

Frosty mornings mean we are creeping closer to winter every day. Some hardcore kayak fishing guys will get out through the winter and fish but a lot of folks just don't like the cold or being on the water in it. Each winter, fishermen start to get cabin fever and thinking about what they need to do. One of the first things many think of is maintenance.

Time to get those reels spiffed up, get that old line off, grease them up, oil them up and then organize some tackle. We also use this time to peruse the internet for new lures and gadgets to rig up our kayaks with. 

Have you ever done your own reel maintenance? Some people love it. Some people (ahem,cough,cough) hate it. I tried it twice. One time about three years ago I decided to try to clean up an old Calcutta I had that was getting pretty grungy. That failed and I had to have a pro put it back together. I tried one more time last summer with a Abu Garcia Orra Inshore. It was salty, sandy and didn't feel right. 

I went down to Academy and bought one of those Ardent reel cleaning kits for $20, went home and started tearing into it. From previous experience I knew I needed a good bench space to work on and planned as I took things off of the reel to lay them left to right. Then, when I was ready to reassemble, just go from right to left. I thought it was pretty flawless. 

I started unscrewing a bunch of parts. A bunch. I didn't have a diagram but that wouldn't stop me. Once I got it to bare bones, I opened up the grease. How much I should put on parts and exactly which parts I wasn't sure. I had heard the old adage "Grease on Gears. Oil on Bearings", but how much. A drop? Two drops? Grease doesn't have drops. It's more like, well, I don't know what it's like. 

Now, 45 minutes into dissecting and chasing tiny parts around on the floor, I'm mad and ready to give up. I put some oil here and grease there and try to reassemble. All the parts are back in but the handle doesn't turn the spool. I decided to tear it down and try again. No luck. Well sassafras! Guess I just ruined a reel. 

I let that Inshore sit on that bench for three days. I would go in and look at the mangled mess and be frustrated. I could rig any kayak, do electrical work, carpentry and even a little welding but this stupid little reel was pissing me off. How is it I could replace a master cylinder and brake kit on a 1978 Ford but couldn't deal with this reel?  

I started looking for help online. Luckily I found someone fairly local. Not only was he close by but he was cheap. Too cheap I think now. I took it to Beau Reed at Papa Chops Rod and Reel Repair in Austin and a few days later I had a cleaned, upgraded reel (I decided to go for the Boca Bearings) that would shoot a four inch worm to the moon. Beau should change his prices. After I get all mine through. The entire cleaning and bearing upgrade including the cost of bearings was less than $70 for my model and the particular bearings I did. He made this nemesis of mine become my new favorite reel. I throw it all the time. His current turn time is about 2 1/2 weeks. 

So what lessons are there here?

#1. Have a plan- You should do extensive research on what lubricants go where, the types to use, get diagrams or pictures of your reel and make sure you have a clean,organized work space. 

#2. Have a backup plan- Reputable reel repair guys are often in your area. Ask around and you'll find out who the best on your block is. Some guys do it themselves, may offer to help and that's cool but when it comes to reel repair and maintenance, I like a professional with access to lots of parts who has tons of experience. 

#3.  Look at upgrades- Taking a $150 reel and making it fly like a $300 reel is satisfying but taking a $100 reel and making it fly like a $300 reel is even better. I did this with a Revo S. Holy. Freaking. Moses.

I've included a link to the video that Beau shot of my reel once he cleaned and upgraded it. It think it speaks for itself. 


(512) 294- 3155

The Boca Treatment from Papa Chops

This story starts with a reel.

My reel.

I returned home from a few days in the salt and my Abu Garcia Orra Inshore seemed sluggish. Surf fishing and reeling in 30 pound Stingrays tends to do that to a mid-range reel. 

Me, being the penny pincher I am (try to be), decided to buy a cleaning kit, watch a How To You Tube video and clean the Orra myself. Bad mistake. I managed to keep all of the parts (small miracle) and then posted a distress call on Facebook.

Beau Reed of Papa Chops Rod and Reel Repair said he could get it back and going again. We were going to be fishing at Lake Austin with a bunch of folks in a few days so I bagged it up to take it to him.

I got to chatting with Beau around the campfire that weekend and he asked me if I wanted to do a bearing upgrade with Bocas while he was fixing my reel. I had always heard about Boca Bearings but never really understood what they would do for me. Beau talked me through it and I agreed.

A few days later I get a notification on Facebook that I have been tagged in a new video. The video was Beau, showing my reel completed, upgraded and then I saw it. Holy Freaking Moses I saw it! He spun the spool on that Orra and it just kept going. I could have made a sandwich in the time it took it to stop. He made a $150 reel spin better than any $300 reel on the market! (For those keeping score, Beau can do most bearing upgrades with a cleaning for less than $70 total.)

I got the reel back that week and got to fish with it. After the first cast, I had to relearn what adjustments needed to be made. Usually I would adjust the drag to where a bait would slowly fall and cast it without much worry. I learned to do that on my reels because my spool would stop spinning before it would overrun. With Bocas, the spool keeps going so different adjustments needed to happen. I tightened down a little more and minded my thumb a little more and threw that bait, a 4” weightless Hag’s Tornado (plastic worm) twice if not three times farther than normal.

Two to three times farther!

I have always kept a small arsenal of spinning gear because I liked the distance I could get when casting weightless soft plastics. I am seriously reconsidering that now. On Thursday, I have more work being done by Beau at Papa Chops Rod and Reel Repair and you’re absolutely right if you guessed Boca Bearings will be involved. Want to see a video with the reel he Boca'd? Check it out here: Facebook Video Link
(You'll need to either friend me or like the page to see it. )

Do you have a favorite reel that needs a make over? Do you have a newer reel that you want to sing when you cast it? Give Beau a call at 512-294-3155. Ask him for the Boca Treatment. Saltwater reels? No problem. Freshwater reels? Of course!   

Got something to add? Hit me up on Facebook! Want to know when a new article is up? Click on the Follow This Blog button on the right. Want the Monthly Newsletter? Click on subscribe to the left. Don't forget to follow PPF on Facebook at and on Twitter @paynefish. - See more at: